- 电压击穿试验仪
- 介电常数
-
电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
-
高温绝缘电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:石墨电极电阻率测试仪
-
210-炭块电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:121T-高温电阻率测试...
-
多功能极片电阻测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121A-绝缘电阻率测试...
-
点对点对地电组率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:油介质损耗电阻率测试仪
-
121A1-热刺激电流测...
-
落球回弹试验仪,介电击穿强度测定仪:121B-全自动电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:高低温绝缘电阻率测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121-体积表面电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 落球回弹试验仪,介电击穿强度测定仪:电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
-
海绵泡沫材料检测仪器
-
泡沫起升仪
-
新-泡沫分析仪
-
海绵泡沫切割机
-
织物透气率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩变形试验箱
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩变形试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵落球回弹试验仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压陷硬度测试仪
-
海绵压缩蠕变测试仪
-
海绵空气透气率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵往复冲击疲劳试验机
-
海绵泡沫缓冲能量试验机
-
落球回弹试验仪,介电击穿强度测定仪:2000-海绵拉伸撕裂试...
-
落球回弹试验仪,介电击穿强度测定仪:1000-海绵拉伸撕裂试...
-
落球回弹试验仪,介电击穿强度测定仪:慢回弹泡沫复原时间测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-慢回弹泡沫复原时间测...
-
泡沫起升仪
- 落球回弹试验仪,介电击穿强度测定仪:受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动角测定仪
-
落球回弹试验仪,介电击穿强度测定仪:塑料表观密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:普通磨料堆积密度仪
-
白土堆积密度测定仪
-
氧化铝流动时间测定仪
-
压实密度粉末电阻率仪
-
陶粒砂体积密度测定仪
-
氧化铝松装密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:表面活性剂表观密度仪
-
自由流动堆积密度测定仪
-
超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高端电压小电流值校正仪(耐弧光校正仪)-(求算机操纵)
High voltage low current tester (arc resistance tester) - (computer control)
產产品标题称:耐电弧试验机
Product name: electric arc resistance tester
新产品技术参数:NDH-A
Product model: NDH - A
满足需要条件:GB/T 1411-2002《固态物体隔绝材质耐高压得过低电流值电弧电流电流的实验》(符合IEC 61621-1997)及ASTM D495等标的请求设汁产生的,并合乎IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
最主要适合範圍及特点:
本实验设计机是按落球回弹试验仪,介电击穿强度测定仪于三相电机、挂式电和挂式挂式电等行业领域的焊工用资料、不饱和光敏树脂胶和电电接地带电阻漆等电电接地带电阻资料的耐电孤功效考核评价,主于混合物电电接地带电阻资料如:资料、溥膜、不饱和光敏树脂、黑云母、瓷质、玻璃纸、电电接地带电阻油、电电接地带电阻漆、厚纸板等材质的耐电孤功效测试英文;
本做科学科学试验的时候机由计算出机调控开机运行,能彰显眼下科学科学试验模式及科学科学试验耗时,科学科学试验终结后并另存眼下科学科学试验动态数据,并可复印机.规格实验意见书意见书。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 该设备为上下两边一体化格局,下边为基本手机操作系统的,上方为疲劳恒温恒湿试验箱。
2 本车辆分为*新智慧掌握技能,可以通过采用程序流程(IEC或ASTM)可手动进行可靠性试验,并在租赁上界面显示做实验的时候的过程和结局。
3 **专业能力正常,抗抑制专业能力强,測試精度等级高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电弧放电通断的时间粗差:乘以 ±10ms
2 调压器体积:2kVA
3 额定的应力测试额定电压:12.5kV
4 试验台线电压gps精度:±3%
5 电流量把控好精确度:±10% 电流大小衡量计算精度:1.5%
6 参比电极对制样压差:(0.5±0.05)N
7 电极片物料:钨棒
8 探针距里:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 动用学习环境高温:(23±2)℃
10 便用自然环境相对湿度:(50±5)%
11 电压:220V±5% 50Hz
12 实验 办法: 国家标准/美标/10 mA 不间断/20 mA 间隔/30 mA陆续/40 mA接连
13 检测流程如下所述:
| 源程序段 | 脉冲电流大小 mA | 脉冲通断准确时间s | 各流程段延续时光s | 可靠性试验总周期s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 连续式通 | 60 | 240 | |
| 5 | 20 | 间断性通 | 60 | 300 | |
| 6 | 30 | 陆续通 | 60 | 360 | |
| 7 | 40 | 连续不断通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 编号 | 名字 | 数据 | 备注栏 |
| 01 | 耐脉冲自测仪 | 一款 | |
| 02 | 金属电极体系 | 1套 | |
| 03 | 电极片支承 | 一台 | |
| 04 | 交流电源电缆电线 | 买套 | |
| 05 | 保护接地放** | 即使 | |
| 06 | 交流电毫安表 | 一架 | |
| 07 | 台式机测控游戏 | 1套 | |
| 08 | 试件材料架 | 一批 | |
| 09 | 工业距里准则块 | 2块 | |
| 10 | 的视角基准块 | 2块 | |
| 11 | 淘瓷片 | 2片 | |
| 12 | 喷墨彩打机 | 1台 | 品牌标志 |
| 13 | 电脑网络 | 1台 | 的品牌 |
| 14 | 的使用证明书 | 1份 | |
| 15 | 合格率证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 好产品型號:
NDH-A 耐电弧放电检测仪-微机抑制
NDH-B 耐电弧放电耐压试验仪-触感屏保持
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!